Cain Patel
← All projects

iPhone 17 Case

A press-fit case for an iPhone 17, modeled in Fusion 360 for 3D printing.

  • Fusion 360
  • CAD

design2026

Shaded render of the case seen into its open front: a thin shell with rounded corners, three camera openings, and cutouts along its edges.

A shell that wraps the phone’s back and sides, with cutouts along the edges for the buttons, charge port, and speakers, modeled in Fusion 360. The downloads above are the printable STL and the STEP source.

Figures

The same case from the outside back, showing the smooth shell and the three camera openings.
The outside: one smooth shell, with the camera openings cut through it.